Our team of Expert Electricians can provide an array of electrical services for projects of any size and scope. We can provide most of your electrical and automation work without using any sub-contractors.
Industrial Plants (Electrical Design, Automation, Maintenance & Service)
We work hand in hand with plant operators to design, automate and service industrial plants that will minimize down time and we utilize the most innovative, reliable and economically available equipment with built in alarms and redundancies. We believe in building it right the first time! Our customers are the best producers in the industry and we have over 40 years of experience from working with them. Type of plants that we specialize in: gas plants, asphalt plants, cement plants, sand plants, water treatment plants and rock quarries.
Our Industrial Plant Services Include:
Design/Build Projects: Motor control, NEC Code and PLC’s.
Processing Facilities: Strong knowledge of Federal, state, and local electrical codes, electrical theory, motor control.
Industrial Manufacturing Plants: Trouble shoot electrical challenges.
Field Offices: Alarm control, layout, lighting retrofit and production maintenance.
Remodel/Retrofits: Electrical repairs and maintaining electrical systems.
24 HOUR Emergency Service Calls
What is an Asphalt Plant?
An asphalt plant is a plant used for the manufacture of asphalt, macadam and other forms of coated roadstone, sometimes collectively known as blacktop or asphalt concrete.
Asphalt plants for road construction
The manufacture of coated roadstone demands the combination of a number of aggregates, sand and a filler (such as stone dust), in the correct proportions, heated, and finally coated with a binder, usually bitumen based or, in some cases, tar,although tar was removed from BS4987 in 2001 and is not referred to in BSEN 13108/1. The temperature of the finished product must be sufficient to be workable after transport to the final destination. A temperature in the range of 100 to 200 degrees Celsius is normal.
Countries have individual specifications stipulating how much of the raw material can be allowed from recycled asphalt. In-depth research shows that addition of unto 20% recycled asphalt produces the same quality of asphalt compared to 100% virgin material. The quality of Asphalt starts reducing once the percentage of recycled asphalt increases beyond 20%.*
What is a Natural Gas Processing Plant?
Natural-gas processing is a complex industrial process designed to clean raw natural gas by separating impurities and various non-methane hydrocarbons and fluids to produce what is known as pipeline quality dry natural gas.
Natural-gas processing begins at the well head. The composition of the raw natural gas extracted from producing wells depends on the type, depth, and location of the underground deposit and the geology of the area. Oil and natural gas are often found together in the same reservoir. The natural gas produced from oil wells is generally classified as associated-dissolved, meaning that the natural gas is associated with or dissolved in crude oil. Natural gas production absent any association with crude oil is classified as “non-associated.” In 2009, 89 percent of U.S. wellhead production of natural gas was non-associated.
Natural-gas processing plants purify raw natural gas by removing common contaminants such as water, carbon dioxide (CO2) and hydrogen sulfide (H2S). Some of the substances which contaminate natural gas have economic value and are further processed or sold. A fully operational plant delivers pipeline-quality dry natural gas that can be used as fuel by residential, commercial and industrial consumers.**